Nortel Networks 8000 User Manual
Page 485
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
_____ Configuration -WAN Access
HSSI interface, 2-11
synchronous serial interface, 2-8
baud rate, 2-5
DCD signal detection, 2-6
P
POS interface
check word length of CRC, 4-13
frame format, 4-12
PPP
compression, 6-20
PPPoE
enabling, 12-4
service name, 12-4
PPPoE configuration parameter, 12-5
PVC
automatic switching mode, 8-28
S
setting
a X.21 address, 7-14
STM-1 CPOS interface
characteristic, 4-8
sub-interface overview, 5-2
synchronous serial interface
T
troubleshooting ATM, 10-41
V
virtual interface list, 1-3
X
X.25
encapsulating, 7-14
flow control, 7-17
packet numbering modulo, 7-17
supplementary parameter, 7-18
vC range, 7-15
X.25 overview, 7-3
X.25 switching
enable, 7-34
SVC, 7-35
XOT router configuration, 7-35
i-2
Nortel Networks Inc.
Issue 5.3 (30 March 2009)