7 configuring the ppp link quality detection, 7 configuring the ppp link quality detection -23, Configuring the ppp link quality detection – Nortel Networks 8000 User Manual

Page 150: Routing table

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

6 PPP and MP configuration

Nortel Secure Router 8000 Series

Configuration -WAN Access

The interface view appears.

Step 3

Run:

ppp ipcp dns primary-dns-address [ secondary-dns-address ]

The command configures the DNS server address of the local negotiation.

By default, a router does not provide DNS server address for its peer.

—End

6.5.7 Configuring the PPP link quality detection

Do as follows on the routers:

Step 1

Run:

system-view

The system view appears.

Step 2

Run:

interface interface-type interface-number

The interface view appears.

Step 3

Run:

ppp Iqc close-percentage [ resume-percentage ]

The command enables the PPP link quality detection.

Using the

ppp Iqc

command, you can detect the quality of the low-speed line. The command

cannot be used on the high-speed POS interface.

—End

6.5.8 Configuring peer host router to be suppressed for adding
into the local end direct routing table

Do as follows on the routers:

Step 1

Run:

system-view

The system view appears.

Step 2

Run:

interface interface-type interface-number

The system view appears.

Step 3

Run:

ppp peer hostroute-suppress

6-24

Nortel Networks Inc.

Issue 5.3 (30 March 2009)

Advertising