Flowserve Logix MD+ ValveSight - Manual (Page 13)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
13
Set Port Address
•
Select the correct port where the modem is installed.
•
Check with the modem manufacturer to select the correct “Access Mode”.
•
Under the “Communications Mode”, set the correct “Access Mode”
•
Click the Apply or Ok button to apply modem configuration changes.
Add ValveSight Logix MD+ DTM
To add the ValveSight Logix MD+ DTM, right click on the OEM HART Communication
DTM in the “Network Views” window and select “Add”.