Flowserve Logix MD+ ValveSight - Manual (Page 274)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
274
The Start button will start the calibration.
The Abort button cancels the calibration. Values that were set will become active.
The Finish button activates the new calibration parameters.
The Print Report button sends the report to the default printer.
NOTE: It is possible to print the report to save to a PDF file. Instructions:
1. Download and install the free version of PDFCreator.
2. Install the PDFCreator
3. Set PDFCreator as the default Printer
4. Click Print Report and save the report to a pdf file in your computer.