Flowserve Logix MD+ ValveSight - Manual (Page 234)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
234
Reverse Orientation - Though the positioner is mounted upside down, the display can still
be read.
Squawk Mode
This switch Activates or Deactivates the Squawk mode of the positioner. Squawk Mode
causes the LED lights to rapidly flash green-green-red-red, and the LCD to flash also.
Dip Switch Configuration
The
DIP Switch Configuration area allows you to view and change the basic configuration
of the positioner.
The Active Dip Switch Settings (Software) on the left side show the settings currently
applied to the positioner. These settings are adjustable.
CAUTION: Adjusting the Air Action, Actuator Action, or Characterization switches will
cause the valve to move.
The Physical Dip Switch Settings (Positioner) settings on the right side show the position of
the DIP switches on the positioner.
During a Quick-Cal (initiated by holding down the Quick-Cal button for 3 seconds) the