Flowserve Logix MD+ ValveSight - Manual (Page 181)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
181
Hysteresis and Deadband
This area shows the values for the average and maximum combined hysteresis and
deadband. It also shows the difference between the values of the first file compared to the
second file.
Repeatability
The Repeatability area shows the values for the average and maximum repeatability. It also
shows the difference between the values from the first file compared to the second file.
Linearity Error
The Linearity Error area shows the values of linearity. It also shows the difference between
the values from the first file compared to the second file.
The graphs are identical to those shown in the HDRL page (Control Signal, HDR, Linearity);
but, they each show the data for both files.
Action Buttons
The Print Report button sends the report to the default printer.
NOTE: It is possible to print the report to save to a PDF file. Instructions:
1. Download and install the free version of PDFCreator.
2. Install the PDFCreator
3. Set PDFCreator as the default Printer
4. Click Print Report and save the report to a pdf file in your computer.