Flowserve Logix MD+ ValveSight - Manual (Page 268)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
268
Time Synchronization
Computer Time & Date is displayed from the host computer.
The Positioner Time & Date is displayed from the positioner.
The arrow button
will write the computer time to the positioner.
Service Hours
Hours in Service shows the number of hours the positioner has been running. If the
positioner is disconnected, this timer will stop.
Lifetime High Temperature shows the maximum temperature the positioner has measured
with the sensor on the circuit board while powered.
Lifetime Low Temperature shows the minimum temperature the positioner has measured
with the sensor on the circuit board while powered.
Revisions
Firmware shows the revision of the firmware.
Hardware shows the revision of hardware.
Action Buttons
The Apply button will save changes to the connected device.
The Retrieve button will retrieve the latest information from the device.