Flowserve Logix MD+ ValveSight - Manual (Page 4)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
4
Welcome to the Logix MD+
Welcome to the Flowserve ValveSight® DTM for the Logix MD+ series digital
positioners. This package offers unparalleled functionality for configuring, calibrating,
maintaining and diagnosing control valve operation.
This package follows the standard FDT/DTM conventions. The Frame application
controls the menu bar at the top of the page and the Frame connection tree at the far
left of the frame window.
The DTM application contains a menu tree on the left side showing the available
pages for configuring, calibrating, maintaining and diagnosing control valve operation.
At the top of the DTM window, the device tag is shown, and some basic information
for the actuator and valve that is currently connected to the system.
The bar right below the device information contains two icons, one to toggle the menu
bar on and off and the other to show this help.
At the bottom of the page below the Flowserve logo is an icon indicating the status of
the connection to the field device. If the icon has a green check and the tow plugs
touching it indicates that communications are taking place and the device shown at
the top of the page is online. Two green arrows to the right of the connection symbol
are visible when the DTM is requesting information from the device.