Flowserve Logix MD+ ValveSight - Manual (Page 18)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
18
Basic Dashboard
The Basic Dashboard is a high level view of the status of the positioner. It is the main view
of the ValveSight® DTM.
Status Area
The Active Indicator area shows the status of the most relevant active indicator. The color
of the "LED light" corresponds to the Active Indicator and the first color of the blink code
sequence on the positioner. Generally green indicates no immediate issues. Yellow
indicates a developing issue. Red indicates the ability to control may be compromised. A
detailed list of the indicators is given in the
Alarm Congfiguraion - Alarm Annunicator page.
The Command Source field indicates weather the positioner is being controlled by digital or
an analog (4-20 mA) command source.
Command and Position
This area contains a graphical representations of the valve command and position. The
blue bar tracks the final command value (after adjustments for characterization curves).
The green position bar indicates the current measured position of the valve. The smaller
pointers show the settings of the travel alert settings (these can be changed on the Travel
Alerts page located under Alarms/Alerts). Grayed out zones at the top or bottom of the
graphs indicate the settings of soft travel limits.