NewTek TriCaster Studio - Manual (Page 76)

Page | 56
Note: Enabling the Underscan switch only affects the onscreen monitor view. It has no effect on
the outgoing video signal. It is useful to check this view, as many projection systems and modern
monitors do display the full frame.
6.1.2 6-CAMERA MODE
This operating mode permits simultaneous live switching of as many as six cameras. However
TriCaster does not display full-time ISO monitors for all six sources in 6-camera operating mode.
Consequently, the monitor section of the
LIVE Production screen is laid out a bit
differently in this operating mode.
A quad-monitor display shows two DDR
previews, along with the Ext (network)
video source. Along with these, a (user-
selectable) Waveform/Vectorscope
display is shown.
Note: In 6-camera mode, the individual monitors do not support interactive switching features.
6.1.3 PREVIEW AND LIVE OUT PUT
The right-hand half of this upper section is split between two large monitors:
Figure 49