TOHO ELECTRONICS TTM200 - Manual (Page 101)

48-7009-E 5-31
5.4.5 Timer function
■ What the timer function is
• A function to generate an event for a predetermined time period or predetermined time after a trigger
is activated.
Some major examples of the use and settings are as follows.
■ Where automatic start/stop of control is desired after power-on (auto-start)
Example of setting for a control for 20 minutes at 180 °C, 2 hours after the power is turned on
SEt04
CNt
Name Setting content Setting value
SV Control setting 180

C 180
Md Control mode Timer 1 makes the control start/stop. TIME1
SEt14
tIME1
Name Setting content Setting value
tMF1 Function setting Auto-start 1
oNt1 On delay timer 2 hours 02:00
oFt1 Off delay timer 20 minutes 00:20
Power
supply
Control
On delay
2 hours
Off delay
20 minutes
ON
OＦＦ
RUN
RDY
Temperature
180℃
Normal
temperature