TOHO ELECTRONICS TTM200 - Manual (Page 59)

48-7009-E 4-18
SET 18: Initial setting mode
0. Setting item selection
screen
1. Password cancel
2. PV normal display color
3. PV color auto-display low
(0: green, 1: red, 2: orange)
4. PV color auto-display middle
(0: green, 1: red, 2: orange)
5. PV color auto-display high
(0: green, 1: red, 2: orange)
6. Switchover width for
PV display color
7. PV event at-output
display color
8. PV at-abnormality
display color
9. CT at-abnormality
display color
10. Loop at-abnormality
display color
To S18-11
11. Blind temporary call
setting
12. Setting value backup
14. Password setting
13. Initialization of setting
value
To SET 18, item 0
SET 19: Priority screen setting mode
0. Setting item selection
screen
1. Priority screen 1 setting
To SET 19, item 0 * Priority screens 1 - 16
displayed in sequence
SET 20: Bank setting mode
0. Setting item selection
screen
1. Bank selection 1 setting
16. Bank selection 16 setting
* Bank selections 1 - 16
displayed in sequence
To SET 20, item 0
16. Priority screen 16
setting