TOHO ELECTRONICS TTM200 - Manual (Page 253)

48-7009-E 7-22
7.5.6 OUT 1 and 2 setting modes (SET 05 and 06) (3/3)
Setting data Character Setting (monitor) value Initial value Unit
Setting
value
Blind
Transmission output
function tRN1
tRN2
Transmission content
*1: PV (Measurement value)
*2: SV (Setting value)
*3: MV 1 (Primary control
operating amount)
*4: MV 2 (Secondary control
operating amount)
*5: Control SV (Setting value)
output *1
Forward/reverse operation
0*: Forward operation
1*: Reverse operation
00 None
Setting data Character Setting (monitor) value Initial value Unit
Setting
value
Blind
Transmission
scaling upper limit tRH1
tRH2
Temperature: tRL* to 2999.9
tRL* to 2999
Note that, for thermocouples R, S
and B, the value of WRe 5-26 or
PR 40-20 is tRL* to 9999.
Analog: tRL* to 29999
1200

C
Digit
Transmissions
scaling lower limit tRL1
tRL2
Temperature: -1999.9 to tRH*
-1999 to tRH*
Analog: -19999 to tRH*
0

C
Digit
*1: Selectable only on Ver3.xx or later.