TOHO ELECTRONICS TTM200 - Manual (Page 252)

48-7009-E 7-21
7.5.6 OUT 1 and 2 setting modes (SET 05 and 06) (2/3)
Setting data Character Setting (monitor) value Initial value Unit
Setting
value
Blind
Event lower limit
E1L
E2L
Temperature: -1999.9 to 2999.9
-19999 to 2999
Note that, for thermocouples R, S
and B, the value of WRe 5-26 or
PR 40-20 is -1999 to 9999.
Analog: -19999 to 29999
0

C
Digit
Event sensitivity
E1C
E2C
Temperature: 0.0 to 999.9
0 to 999
Analog: 0 to9999
0

C
Digit
Event delay timer
E1t
E2t
0 to 9999 0 Second
Event function 2 (PV
abnormality) E1F2
E2F2
Function
**0: Nonexistent
**1: Existent
Add-on function
*0*: None
*1*: Hold
*2*: Delay
*3*: Hold + delay
Control mode interlocking function
0**: All modes
1**: RUN/MAN mode only
2**: RUN mode only
000 None
Event function 3
(CT abnormality) E1F3
E2F3
Function
**0: Nonexistent
**1: CT 1 abnormality
**2: CT 2 abnormality
**3: CT 1 abnormality + CT 2
abnormality
Add-on function
*0*: Nonexistent
*1*: Hold
*2*: Delay
*3*: Hold + delay
Control mode interlocking function
0**: All modes
1**: RUN/MAN mode only
2**: RUN mode only
000 None
Event function 4
(loop abnormality) E1F4
E2F4
Function
*0: Nonexistent
*1: Existent
Add-on function
0*: Nonexistent
1*: Hold
00 None
Event polarity
E1P
E2P 0: Normal open
1: Normal close
00 None