TOHO ELECTRONICS TTM200 - Manual (Page 45)

48-7009-E 4-4
4.2 Basic operation
Flow of each setting item selection screen and each setting mode is described.
4.2.1 Switchover of parameters (flow as a whole)
* The ▲/▼ key is used for switching over setting item selection screens.
* The MODE key is used for switching over screens in each setting mode.
The screen loops back to the setting item selection screen.
* Some mode screens are not displayed, depending on product specifications.
Operating mode
MODE key held pressed
for 2 seconds
Input 1 setting mode
Key function setting
mode
Control setting mode
OUT 1 setting mode
Bank setting mode
MODE key
S04-51
MODE key MODE key
▲key
▼key
Input 2 setting mode
MODE key MODE key MODE key
▲key
▼key
▲key
▼key
▲key
▼key
▲key
▼key
▲key
▼key
▲key
▼key
MODE key MODE key
MODE key MODE key MODE key
MODE key MODE key MODE key
MODE key MODE key MODE key
MODE key
MODE key
Program run function setting
* Setting parameters of SET 21 C/P or after and those of SET 22 are not
displayed if SET 21 C/P

0.
For details, see pages 6-13 and 14.
Bank auto-switchover function setting
* Setting parameters of SET 23 are not displayed if SET 23 bAF

0.
For details, see page 6-15.
* Nos. located in upper left of each parameter screen is identical to the Nos. for items in each parameter screen.
Notation example S20-1: First item in the parameter screen SET 20.