TOHO ELECTRONICS TTM200 - Manual (Page 74)

48-7009-E 5-4
5.3 How to set run settings
The target value (SV) setting, control setting and event setting are described as examples for constant value run
settings.
5.3.1 Target value (SV) setting
When the target value (SV) to be set at 450 °C
① Where setting it as is
Power-on
Initial screen
4 seconds
Constant value run mode screen
Measurement value (PV)
Target value (SV): Set to “0” at factory shipment
Press the ▲ key until the target value changes to “450.”
The digit automatically shifts up.
Constant value run mode screen
Measurement value (PV)
Target value (SV) = 450

C