TOHO ELECTRONICS TTM200 - Manual (Page 94)

48-7009-E 5-24
■ Post-AT control characteristics per control type
Note The control characteristics graph is an example and may differ depending on subjects of controls.
Take care it.
Post-AT control characteristics for setting of PID control types A to C
Time
Measurement value (PV)
Type A
Type B
Type C
Control setting
value (SV)
Control start point
Post-AT control characteristics for setting of PID control type B moderate to intense
Time
Measurement value (PV)
Type B - Moderate
Type B - Intermediate
Type B - Intense
Control setting
value (SV)
Control start point