TOHO ELECTRONICS TTM200 User Manual
Page 32
48-7009-E
3-10
★ Event (DI) input
TTM-204
Terminal Nos. ⑮, ⑯, ⑰ and ⑱
TTM-205
Terminal Nos. ○
28
, ○
29
, ○
30
, ○
31
, ○
32
, ○
33
and ○
34
TTM-207
Terminal Nos. ⑲, ⑳, ○
21
, ○
22
, ○
23
and ○
24
TTM-209
Terminal Nos. ○
28
, ○
29
, ○
30
, ○
31
, ○
32
, ○
33
and ○
34
* When CT 1 or CT 2 is
selected, DI 1 or DI 2 are not
selectable.
* When CT 1 is selected, DT 1
is not selectable.
* When CT 1 or CT 2 is
selected, DI 1 or DI 2 is not
selectable.
* When CT 1 is selected, DI 1 is
not selectable.
* When the output 7 is selected,
DI 3 is not selectable.
TTM-204
TTM-207
TTM-205/209
* For TTM-205/209, the common for
DI 3/DI 4 is shared.
* DI input is optional.
* Max. 4 points are selectable (to be designated at order placement).
* The following functions can be executed through the DI (digital) inputs.
The DI inputs are external no-voltage contact signals.
* List of functions due to DI
Close
Active
Bank switchover
Bank switchover
During constant value run MD
READY
During program run
Start
Stop
MD
MANUAL
Reverse operation
Forward operation
AT stop
AT start
Timer Stop
Timer Stop
Constant value run
Program run
Step feed (during program run) *1
Pause (during program run) *1
Interlock *1
*1: Selectable only for a program run.
Close: Contact signal OFF
Active: Contact signal ON
－
－
－
－
－
－
－
－
＋
＋
＋
＋
＋
＋
＋
＋
＋