TOHO ELECTRONICS TTM200 - Manual (Page 177)

48-7009-E 6-29
■ Primary control loop abnormality time setting
SEt04
CNt
Setting content Initial value
32 LoP1 0 to 9999 (seconds) 0
Set the primary control loop abnormality time setting.
The function is to detect an abnormality in the control loop.
- The control loop anomaly PV change threshold is judged at each “LoP1” time.
A loop abnormality is determined if each change threshold is judged to be equal to or below “PS1.”
For details, see section “5.4.6 Loop abnormality function” on pages 5-38 and 39.