Rice Lake PR5230 Fieldbus Transmitter User Manual
Transmitter in field housing pr 5230
Advertising
Table of contents
Document Outline
- 9499 050 52301
- Table of Contents
- 1 Safety Information
- 1.1 Electrical Protective Class
- 1.2 Intended Use
- 1.3 Initial Inspection
- 1.4 Before Commissioning
- 2 Transmitter in Field Housing
- 3 Options
- 4 Installing the Instrument and Plug-in Cards
- 4.1 Mechanical Preparation
- 4.2 Hardware Construction
- 4.2.1 Main Board
- 4.2.2 Display Board
- 4.2.3 Weighing Electronics Board
- 4.2.4 Cable Gland and Connection
- 4.2.5 Network Port
- 4.2.6 Optocoupler Inputs
- 4.2.7 Opto-decoupled Outputs (optional)
- 4.2.8 Relay Outputs
- 4.2.9 Interface RS-485
- 4.2.9.1 Connecting to PC or to RS-485/RS-232 Converter
- 4.2.9.2 Connecting several PR 5230 to PC or to RS-485/RS-232 Converter
- 4.2.9.3 Connecting a PR 5110 Remote Display
- 4.2.9.4 Connecting a PR 5110 Remote Display to several PR 5230
- 4.2.9.5 Connecting several PR 5110 Remote Displays
- 4.2.9.6 Connecting to PLC
- 4.2.9.7 Connecting several PR 5230 to PLC
- 4.2.9.8 Connecting a xBPI Platform over RS-485 (2-wire)
- 4.2.9.9 Connecting a xBPI Terminal over RS-485 (2-wire)
- 4.2.10 Interface RS-232
- 4.3 Connecting Load Cells
- 4.3.1 Connecting a Load Cell with 4-Wire Cable
- 4.3.2 Connecting PR 6221 Load Cells
- 4.3.3 Connecting up 2 to 4 Load Cells via PR 5230/22 Load Cell Junction Board
- 4.3.4 Connecting up 2 to 8 Load Cells using 6-Wire Connecting Cable
- 4.3.5 Connecting Load Cells with External Supply
- 4.3.6 Connecting Analog Platforms (CAP...)
- 4.3.7 Connecting xBPI Platforms (IS...)
- 4.4 Accessories
- 4.4.1 Installing Plug-in Cards
- 4.4.2 PR 5230/06 Analog Output Board
- 4.4.3 PR 5230/22 Load Cell Junction Board
- 4.4.4 PR 1721/41 ProfiBus-DP Interface
- 4.4.5 PR 1721/42 InterBus-S Interface
- 4.4.6 PR 1721/44 DeviceNet Interface
- 4.4.7 PR 1721/45 CC-Link Interface
- 4.4.8 PR 1721/46 ProfiNet I/O Interface
- 4.4.9 PR 1721/47 EtherNet-IP Interface
- 4.4.10 PR 5230/30 Ethernet Socket
- 4.4.11 PR 5230/31 Ethernet Cable
- 5 Commissioning
- 5.1 Data Protection/Power Failure
- 5.2 Switching on the Instrument
- 5.3 Configuration and Calibration
- 5.3.1 Connecting the Device to the Network and Finding out the IP address
- 5.3.2 Resetting the Network Address/Activating Network ‚DHCP’
- 5.3.3 Searching the Instrument in the Network with 'Indicator Browser'
- 5.3.4 Operation Using the VNC Program
- 5.3.5 Operation Using InternetBrowser
- 5.3.6 Function INFO
- 5.3.7 Setup Function (VNC)
- 5.3.8 Setup Menu (VNC)
- 5.4 Calibration of the Internal Weighing Point
- 5.4.1 Displaying Calibration Data
- 5.4.2 Selecting the Calibration Mode
- 5.4.3 Determining the Maximum Capacity [Max]
- 5.4.4 Determining the Scale Interval
- 5.4.5 Determining the Dead Load
- 5.4.6 Calibration with Weight [by load]
- 5.4.7 Calibration with mV/V Value [by mV/V]
- 5.4.8 Calibration with Load Cell Data (smart calibration)
- 5.4.9 Subsequent Dead Load Correction
- 5.4.10 Linearization
- 5.4.11 Determination Test Value/Display Test Value
- 5.4.12 Finishing/Saving the Calibration
- 5.4.13 Parameter Input
- [Measuretime]
- [Digital filter]
- [Fcut]
- [External supply]
- [Test mode]
- [W & M]
- [Standstill time]
- [Standstill range]
- [Tare timeout]
- [Zeroset range]
- [Zerotrack range]
- [Zerotrack step]
- [Zerotrack time]
- [Overload]
- [Minimum weight]
- [Range mode]
- 5.4.13.1 Legal-for-Trade Operation
- 5.4.13.2 Multiple Range Scale/Multi-Interval Scale
- 5.5 Calibrating a xBPI Scale
- 5.5.1 xBPI Set-up for Serial Port
- 5.5.2 xBPI Scale Function
- 5.5.3 xBPI Platform Configuration
- 5.5.4 xBPI Scale Parameter
- 5.5.5 xBPI Parameter Tables
- 5.5.6 xBPI Setting Dead Load
- 5.5.7 xBPI Calibration with the User Weight
- 5.5.8 xBPI Calibration with Automatic Weight Detection
- 5.5.9 xBPI Calibration with Default Weight
- 5.5.10 xBPI Calibration with Built-in Weight
- 5.6 Configuring General Parameters
- 5.7 Configuring Limit Values
- 5.8 Digital Outputs and Inputs
- 6 J-Bus/ModBus Protocol
- 7 SMA Protocol
- 8 Asycom Protocol
- 9 Fieldbus Interface
- 9.1 Fieldbus Interface Protocol
- 9.2 Description of the I/O Area (Read / Write Window)
- 9.3 Special hints for DeviceNet and EtherNet-IP
- 9.4 Fieldbus Register
- Register 0: IO Status Bits for Reading
- Register 1: Scale Status
- Register 2: State of State-Controlled Action Bits
- Register 4: Calibration Information, Error Byte
- Register 5: Device Type and Software Release
- Register 6: Board Number
- Register 7: (Reserved)
- Register 8 ...15: Weight Data
- Register 24 ... 29: Limit Values (Read/Write)
- Register 30, 31: Fixed Values (Read/Write)
- Register 80 ... 89: State-Controlled Action Bits (Write)
- 10 Global SPM Variables
- 11 Configuration Print-out
- 12 Extended Functions
- 13 Repairs and Maintenance
- 14 Disposal
- 15 Error Messages
- 16 Specifications
- 16.1 Instructions for Use of 'Free Software'
- 16.2 Decoding of the Serial Number
- 16.3 General Data
- 16.4 Effect of Ambient Conditions
- 16.5 Weighing Electronics
- 16.6 Mechanical Data
- 16.7 Use in Legal-for-Trade Mode
- 17 Index
- 18 Appendix