Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 209)

PR 5230 Instrument Manual Extended Functions
Sartorius EN-209
Procedure on the Notebook/PC
4. Click the relevant file in the ‘Explorer’ with the mouse and drag it into window [Select ]
(or use ‘Copy and paste’).
5.
Select [Network].
6. Fill in the device IP address.
7. Click [Flash] to start the procedure.
As soon as software loading is completed the device will be re-started.
Now the next file (firmware) can be loaded as described in steps 2…7.
12.2.3 Updating the Software in a Network with a Fixed IP Address
Prerequisites: - Device and notebook/PC are connected to each other.
- The automatic address assignment ‘DHCP’ is deactivated in the device and in the
notebook/PC, see Chapter 18.2/18.3.
- The ‘FlashIt!32’ program (in a directory on the enclosed CD-ROM) is installed on the
notebook/PC.
- The ‘FlashIt!32’ program is started.
Device presettings in the setup menu
1. Select -[Network parameter].
Setup/ Network parameter
HW address 00:90:6C:6B:6A:5E
Hostname PR5230-6A6B5E
Use DHCP
IP Address 172.24.22.5 2. Enter the corresponding IP address.
Subnetmask 255.255.0.0 3. Enter the corresponding subnet mask.
Default gateway 0.0.0.0
Remote access
VNC-Client 255.255.255.255
4. Leave with .
The IP addresse is shown in the display of the device.