Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 70)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-70 Sartorius
4.4 Accessories
4.4.1 Installing Plug-in Cards
The main board has two additional function-specific sockets, which can be equipped with the following
boards:
-
plug-in position for the analog output board 0/4 – 20 mA, electrically isolated
- plug-in position for a fieldbus card (see Chapter 2.4)
- plug-in position for load cell junction board (see Chapter 4.4.3)
Warning!
Before installing or removing a plug-in card, disconnect the instrument from all voltage
sources.
Plug-in position for fieldbus card (slot 2)
Plug-in position for analog output board (slot 1)
Plug-in position for load cell junction board
Note:
After installation/modification, the PCBs are detected automatically!
To view a list of the installed plug-in cards, except for PR 5230/22,
select
-[Show HW-Slots]:
Info/ HW-Slots
Builtin RS485 Built-in serial interface
Builtin RS232 Built-in serial interface
PR5230/06 analog out Optionally interface (slot 1, C11)
Builtin digital i/o Built-in digital interface
PR1721/41 ProfiBus-DP Fieldbus cards (slot 2, C2x) only
PR5230/W1 ADC For weighing electronics board (W1 or WE1)