6 configuring general parameters, 1 serial interfaces [serial ports parameter, Configuring general parameters – Rice Lake PR5230 Fieldbus Transmitter User Manual
Page 139: Serial interfaces [serial ports parameter, Pr 5230 instrument manual commissioning
PR 5230 Instrument Manual
Commissioning
Sartorius
EN-139
5.6
Configuring General Parameters
The configuration of parameters which are not related to the weighing electronics is divided into several
sections (see Chapter 5.3.8 ).
5.6.1
Serial Interfaces [Serial ports parameter]
To configure the serial interfaces, press
-[Serial ports parameter].
Press .
Press
to select the specific protocol.
Press
to select the respective port.
Setup
Serial ports parameter
Select [Serial ports parameter] with
.
Date
& Time
Operating parameter
Printing parameter
Example of Selection
Setup/
Serial ports
Printer
Builtin RS232
Remote display
-none-
JBUS/MOD-Bus
-none-
SMA
-none-
Asycom
-none-
xBPI-Port
Builtin RS485
Select [Param].
Param
Config
Note:
Determine the print settings with [Config], see Chapter 5.6.4.