Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 68)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-68 Sartorius
4.3.6 Connecting Analog Platforms (CAP...)
One Combics analog platform (CAP... series) can be connected to the instrument.
The following example shows a platform with 6-wire connection and another one with 4-wire connection.
Platforms with 4-wire
connection require following
links:
between +V and +S
between –V and –S
Caution!
The cable colors shown above are valid for a CAPP4 500 x 400 and a CAPP1 320 x 420,
as an example.
The assignments of cable colors are given in the platform operating manual.
The cable shields must be connected to the GND terminal of the instrument (see Chapter 4.2.4). If the
measuring lines (+M, -M) are shielded individually, these shields must be connected to the GND terminal as
well.