Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 85)

PR 5230 Instrument Manual Installing the Instrument and Plug-in Cards
Sartorius EN-85
4.4.7.1 Status LEDs on Fieldbus Card
Watchdog LED Meaning
Frequency Color
Flashing 1 Hz green Module is initialized and ready for operation.
Flashing 2 Hz green Module is not initialized.
Flashing 1 Hz red Check error in ASIC and FLASH ROM, module is defect.
4.4.7.2 Status Display
Requirements
In -[Display items] the items are configured, see Chapter 5.6.7.
In -[HW-Slots] PR 1721/45 is selected.
Display
1 2 3 4
LED --- --- --- ---
1 2 3 4
Lit - - -:
No power on the
module.
Lit - - -:
No power on the
module.
Lit - - -:
No power on the
module.
Lit - - -:
No power on the
module.
Lit grn:
Normal operation.
Lit red:
CRC error,
Illegal station number or
illegal baudrate selected.
Lit grn:
Data being transmitted.
Lit grn:
Data being received.
Legend
--- off
red red
grn green
4.4.7.3 Connection
Caution!
The cable screen must be taken into the instrument through the cable gland and
connected to terminal 4 (see page 84).
Before, during and after installation, make sure that the sealing rings are seated
correctly.