Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 215)

PR 5230 Instrument Manual Error Messages
Sartorius EN-215
15.2 Weight Error Status
VNC text (see also Chapter 15.1)
E:Arith E:Invrs E:Overl E:NoSig E:Sense E:HardE/ E:NoCom
flashing 1 Hz flashing 1 Hz Altern. flash. 1 Hz Altern. flash. 1 Hz
flashing 1 Hz flashing 1 Hz Altern. flash. 1 Hz
flashing 1 Hz flashing 1 Hz flashing 1 Hz flashing 1 Hz Altern. flash. 1 Hz Altern. flash. 1 Hz
Note:
With all other messages, the upper status indicator LED blinks.
15.3 Error Messages with xBPI Scales
Indication VNC text Error and possible cause Remote display
E:Value Value exceeds display The weight value is not displayed:
- Too many digits have been set
Error 4
E:NoCom No values from scale No Communication with xBPI scale:
- Cable break
- Internal scale error
- The scale is not connected to the supply
voltage.
Error 9
E:NoWgt No weight data No weight data:
-
Wägepunkt umgeschaltet
• Mit den neuen Wägepunkt dem Gerät
zuweisen.
Error •
E:NotRed Scale not ready The scale is not ready for weighing:
-
The instrument is in the warm-up phase.
- The instrument is in the automatic taring
mode.
- The instrument was switched on with the
scale loaded.
• Switch the device off and on again.
Error c
E:BadDev Wrong serial number ‘Serial number’ does not correspond to the
number set in the device.
Error ?