Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 106)

Commissioning PR 5230 Instrument Manual
EN-106 Sartorius
5.3.8.1 Weighingpoint ‚Internal A’
- Calibration Calibration of weighing electronics
- New
Reset Span and dead load Contin, Cancel
- Max 0.00001 ...<3000>... 999999 <kg>, t, lb, g
- Scale interval <1>, 2, 5, 10, 20, 50
- Dead load at <0.000000 mV/V> or [by load]
- Max at <1.000000mV/V> or [by load]
by load 0.00001 ... 999999 <kg>, t, lb, g
- Calibrated at (Display only)
- Sensitivity (µV/d) (Display only)
- Test Determine test value
Exit calibration Save or cancel changes
- Modify Only for minor modifications/ setting new dead load, otherwise [New]
see New
- Param
- Measuretime 5 ms, 10, 20, 40, 80, 160, <320>, 640, 960, 1280, 1600ms
- Digital filter <off>, Bessel, aperiod., butterw., tscheby.
- External supply <8 -12 VDC>, below 8 VDC
- * Fcut Cut off frequency, *only unless filter 'off', 0.1 - 80.0 Hz
- Test mode <Absolute>, relative
- W & M <none>, OIML (cannot be selected, if 'Range mode: Multi-interval' has
been selected or Max has more than 3 decimals), NSC, NTEP
- Standstill time 0.01 s…<0.50 s> ... 2.0 s (range is dependent on response time)
- Standstill range 0.00 d ... <1.00 d> ... 10.00 d
- Tare timeout 0.1 s ... <2.5 s> ... 25 s, timeout due to instability
- Zeroset range 0.00 d ... <50.00 d> ... 10000.00 d
- Zerotrack range 0.00 d ... <0.25 d> ... 10000.00 d
- Zerotrack step 0.00 d ... <0.25 d> ... 10.00 d
- Zerotrack time <0.0 s> ... 25 s
- Overload 0 d ... <9 d> ... 999999 d
- Min 0 d ... <50 d> ... 999999 d, minimum weight
- Range mode <Single range>, multiple range, multi-interval (not if OIML selected)
- * Range limit 1 In weight, unit same as Max, transition from small to medium scale
interval
- * Range limit 2 In weight, unit same as Max, transition from medium to high scale
interval
* only for multiple range or multi-interval
- View(when CAL switch closed)
- Max (Display only)
- Scale interval (Display only)
- Dead load at (Display only)
- Max at (Display only)
- Calibrated at (Display only)
- Sensitivity (µV/d) (Display only)
- Param Items as for Param. (display only)