Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 58)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-58 Sartorius
4.2.10.2 Connecting a YDP12IS or YDP04IS Ticket Printer
The ticket printer YDP12IS-OCEUV or YDP04IS-OCEUV can be connected via [Builtin RS232] interface.
If the printer is connected to the [Builtin RS232] port:
• Press -[Serial ports parameter]-[Printer]-[Builtin RS232]-[Param] and configure the following settings
under [Protocol]: [RTS/CTS], [Baudrate]: 9600, [Bits]: 8, [Parity]: [none], [Stopbits]: 1 and [Output mode]:
[Raw].
• The printer must be set to Line Mode (factory setting: Page Mode). Press the 'FEED' button to change
modes; please refer to the installation instructions delivered with the printer.