Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 82)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-82 Sartorius
4.4.6.1 DIL Switch
Caution!
The DIL switch settings will not be used.
Make sure that the switches 1…8 are set to position ‘ON’!
Settings will be done in the menu [Setup]-[Fieldbus Parameter].
4.4.6.2 Status-LEDs on Fieldbus Card
Watchdog LED Meaning
Frequency Color
Flashing 1 Hz green Module is initialized and ready for operation.
Flashing 2 Hz green Module is not initialized.
Flashing 1 Hz red Check error in ASIC and FLASH ROM, module is defect.
4.4.6.3 Status Display
Requirements
In -[Display items] the items are configured, see Chapter 5.6.7.
In -[HW-Slots] PR 1721/44 is selected.
Display
1 2 3 4
LED --- --- --- ---
1 2 3 4
Lit - - -:
No function.
Lit - - -:
Not powered, not online.
Lit - - -:
No function.
Lit - - -:
No power to device.
Lit grn:
Link OK, online, connected.
Lit grn:
Device operational.
Flashing grn:
Online, not connected.
Flashing grn:
Data size > configuration.
Lit red:
Critical link error.
Lit red:
Unrecoverable error.
Flashing red:
Connection timeout.
Flashing red:
Minor error.
Legend
--- off
red red
grn green