Jbus/mod-bus protocol [jbus/mod-bus, Sma protocol [sma, Commissioning – Rice Lake PR5230 Fieldbus Transmitter User Manual
Page 142: Pr 5230 instrument manual
Commissioning
PR 5230 Instrument Manual
EN-142
Sartorius
JBUS/MOD-Bus protocol [JBUS/MOD-Bus]
To configure the serial interfaces, press
-[Serial ports parameter]-[ JBUS/MOD-Bus] to select a RS-232
interface.
Press
to select the specific parameter.
Press
to select the respective values.
The light gray displayed parameter cannot be changed.
Setup/Serial ports/
Builtin RS232
Assigned to
JBUS/MOD-Bus
Protocol
JBUS/MOD-Bus
Baudrate
9600 bd 300, 600, .... 19200, 38400
Bits
8
Parity
even no, odd, even
Stopbits
1
Slave
1
Press
to return to the menu ‚Serial ports’.
Press
to return to the setup menu of [Serial ports parameter]. When you close this menu, the following
messages are displayed if at least one setting was changed:
Save settings
Starting JBUS/MOD-Bus
The JBUS/MOD bus protocol is described in Chapter 5.10.
SMA protocol [SMA]
To configure the serial interfaces, press
-[Serial ports parameter]-[SMA] to select a RS-485 interface.
Press
to select the specific parameter.
Press
to select the s respective values.
The light gray displayed parameter cannot be changed.
Setup/Serial ports/
Builtin RS485
Assigned to
SMA
Protocol
SMA
Baudrate
9600 bd 300, 600, .... 19200
Bits
8
Parity
none
Stopbits
1
The SMA protocol is described in Chapter 7.