CANOGA PERKINS 9175 Command Reference - Manual (Page 123)

CanogaOS Command Reference
7-20
Related Commands
7.31 revision
Use this command to create an mstp revision number.
Command Syntax
revision number
no revision number
number Specify the configuration revision number. The range is 0 to 65535.
Command Mode
mst configuration mode
Default
Default value is 0.
Usage
Examples
Switch# configure terminal
Switch(config)# vlan database
Switch(config-vlan)# vlan 10
Switch(config-vlan)# exit
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# revision 1
Related Commands
7.32 clear spanning-tree detected protocols
Use this command to clear the detected protocols for a specific bridge or interface.
Command Syntax
clear spanning-tree detected protocols [interface interface-id]
interface-id Specify the name of the interface on which protocols have to be cleared.
Command Mode
Privileged Exec mode
Default