22 set local-preference, 23 set metric – CANOGA PERKINS 9175 Command Reference User Manual
Page 353
CanogaOS Command Reference
19-22
Switch(config-route-map)# set ip next-hop 10.10.0.67
Related Commands
19.22 set local-preference
Use this command to set the specified local-preference value.
Use the no parameter with this command to turn off the setting.
Use this command to set the local-preference value of the routes
Note:
This command is valid for BGP only.
Command Syntax
set local-preference LOCAL-PREFERENCE
no set local-preference
Syntax Description
LOCAL-PREFERENCE
<0-4294967295> Species the preference value.
Command Mode
Route-map mode
Defaults
No set local-preference is specified by default.
Examples
Switch# configure terminal
Switch(config)# route-map mymap permit 3
Switch(config-route-map)# set local-preference 100
Related Commands
19.23 set metric
Use this command to set a metric value for a route.
Use the no parameter with this command to disable this function.
This command sets the metric value for a route, and influences external neighbors about the