CANOGA PERKINS 9175 Command Reference - Manual (Page 240)

CanogaOS Command Reference
15-31
Examples
The following is sample output from the show ip ospf command when entered without a specific OSPF
process ID:
Switch# show ip ospf
Routing Process "ospf 0" with ID 10.0.0.1
Process uptime is 3 days 0 hour 20 minutes
Process bound to VRF default
Conforms to RFC2328, and RFC1583 Compatibility flag is disabled
Supports only single TOS(TOS0) routes
This router is an ASBR (injecting external routing information)
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Refresh timer 10 secs
Number of incomming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of non-default external LSA 0
External LSA database is unlimited.
Number of LSA originated 10
Number of LSA received 0
Number of areas attached to this router: 4
Area 0 (BACKBONE) (Inactive)
Number of interfaces in this area is 0(0)
Number of fully adjacent neighbors in this area is 0
Area has no authentication
SPF algorithm last executed 67:05:44.981 ago
SPF algorithm executed 4 times
Number of LSA 0. Checksum 0x000000
Area 3 (Stub)
Number of interfaces in this area is 1(1)
Number of fully adjacent neighbors in this area is 0
Number of fully adjacent virtual neighbors through this area is 0
Area has no authentication
SPF algorithm last executed 66:56:57.482 ago
SPF algorithm executed 2 times
Number of LSA 1. Checksum 0x004766
Shortcutting mode: Default, S-bit consensus: ok
Related Commands