2 no mpls vpls-vlan, 3 mpls vpls-vlanmpls vpls – CANOGA PERKINS 9175 Command Reference User Manual
Page 520
CanogaOS Command Reference
29-2
29.2 no mpls vpls-vlan
Use this command to release a block of continuous vlan id which used for vpls
function.
Note:
This command will release the block of continuous vlan id.
This command used disable vpls function. when no vpls instance
is created, this command can succeed.
Command Syntax
no mpls vpls-vlan
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls vpls-vlan command is used to release a
block of continuous vlan id which used for vpls function:
Switch# configure terminal
Switch(config)#
no mpls vpls-vlan
Related Commands
29.3 mpls vpls-vlanmpls vpls
Use this command to create a VPLS instance and come into the VPLS instance
mode.
Note:
This command will create a VPLS instance, and come into this
instance mode. If the instance have been created, without
inputting the VPLS-ID, it comes into the instance mode without
creating VPLS instance.
Command Syntax
mpls vpls NAME [VPLS-ID]