40 show ldp mpls-l2-circuit, 41 show ldp session – CANOGA PERKINS 9175 Command Reference User Manual
Page 447
CanogaOS Command Reference
25-35
show ldp lsp host
show ldp lsp prefix
show ldp lsp cr-lsp
25.40 show ldp mpls-l2-circuit
Use this command to display summarized Layer-2 Virtual Circuit information.
Command Syntax
show ldp mpls-l2-circuit [detail | Virtual_Circuit_ID]
Syntax description
detail
Show detailed information
Virtual_Circuit_ID Specify the MPLS Layer-2 Virtual Circuit by
circuit identifier, the range is 1 to 4294967295.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp mpls-l2-circuit command is used to
display summarized Layer-2 Virtual Circuit information:
Switch #
show ldp mpls-l2-circuit detail
Switch #
show ldp mpls-l2-circuit 34 detail
Related Commands
25.41 show ldp session
Use this command to display sessions established between the current LSR
and other LSRs.
Command Syntax
show ldp session [A.B.C.D]