CANOGA PERKINS 9175 Command Reference - Manual (Page 49)

CanogaOS Command Reference
4-5
Command Mode
Line configuration
Default
15
Usage
None
Examples
The following example assigns default privilege level to 1.
Switch(config-line)# privilege level 1
The following example returns the privilege level to default value.
Switch(config-line)# no privilege level
Related Commands
None
4.8 bandwidth
Use this command to set the bandwidth of the port.
To return the bandwidth to default value, use the no form of this command.
Command Syntax
bandwidth bandwidth
no bandwidth
bandwidth :<1-10000000> port bandwidth, in kilobits
Command Mode
Interface configuration
Usage
None
Examples
The following example set the bandwidth of the port.
Switch(config-if)# bandwidth 1000
The following example returns the bandwidth to default value.
Switch(config-if)# no bandwidth
Related Commands
duplex
speed