5 show ip arp summary – CANOGA PERKINS 9175 Command Reference User Manual
Page 193
Advertising
CanogaOS Command Reference
13-4
Internet 10.0.20.254 - 0000.5e00.0101 eth-0-10
Related Commands
arp
13.5 show ip arp summary
To display the total number of Address Resolution Protocol (ARP) table entries, the number of ARP table
entries for each ARP entry mode, and the number of ARP table entries for each interface on the router,
use the show ip arp summary command in privileged EXEC mode.
Command Syntax
show ip arp summary
Command Mode
Privileged EXEC
Usage
Use this command to display high-level statistics about the ARP table entries:
Examples
The following is sample output from the show ip arp summary command:
Switch# show ip arp summary
5 IP ARP entries, with 0 of them incomplete
Related Commands
arp
Advertising