CANOGA PERKINS 9175 Command Reference - Manual (Page 36)

CanogaOS Command Reference
3-2
Examples
In the following example, the user enters privileged EXEC mode using the enable command, then exits
back to user EXEC mode using the disable command. Note that the prompt for user EXEC mode is >,
and the prompt for privileged EXEC mode is #.
Switch> enable
Password: <password>
Switch# disable
Switch>
Related Commands
enable
3.3 enable
To enter privileged EXEC mod, use the enable command in user EXEC or privileged EXEC mode.
Command Syntax
enable
Command Mode
User EXEC
Privileged EXEC
Usage
None.
Examples
In the following example, the user enters privileged EXEC mode using the enable command. The
system prompts the user for a password before allowing access to the privileged EXEC mode. The
password is not printed to the screen. The user then exits back to user EXEC mode using the disable
command. Note that the prompt for user EXEC mode is the greater than symbol (>), and the prompt for
privileged EXEC mode is the number sign (#).
Switch> enable
Password: <password>
Switch# disable
Switch>
Related Commands
disable