7 configuring a rmep archive hold time – CANOGA PERKINS 9175 Command Reference User Manual
Page 162
CanogaOS Command Reference
10-5
Switch(config)#spanning-tree max-age 12
Related Commands
10.7 Configuring a RMEP archive hold time
Use this command to configure the number of minutes that data from a missing remote maintenance end
point (mep) is kept before it is purged.
Command Syntax
ethernet cfm mep archive-hold-time minutes
Command Mode
Configure mode
Default
The default is 5 minutes. The value in the range 1 to 65535 minutes.
Usage
None
Examples
Switch#configure terminal
Switch(config)# ethernet cfm mep hold-time 60
Related Commands
10.8 Configure per MA continuity check (cc) parameters
Use the command to define continuity check parameters for an MA.
Command Syntax
ethernet cfm cc enable level LEVEL vlan VLAN_ID
no ethernet cfm cc enable level LEVEL vlan VLAN_ID
Command Mode
Configure mode
Default