CANOGA PERKINS 9175 Command Reference - Manual (Page 723)

CanogaOS Command Reference
40-52
this time, the switch buffered these same logs. You can use the timeout keyword to set the time range,
and use the fifo-size to set the buffer size.
Examples
The following is sample output from the logging merge command.
Switch(config)# logging merge enable
Related Commands
logging buffer
40.71 logging operate
To log the operations, use the logging operate command in global configuration mode.
Command Syntax
logging operate {enable | disable}
enable Enable logging operations.
disable Disable logging operations.
Command Mode
Global configuration
Default
Logging operations is disabled
Usage
The logging merge command merges all the same logs into one during a specified time range. During
this time, the switch buffered these same logs. You can use the timeout keyword to set the time range,
and use the fifo-size to set the buffer size.
Examples
The following is sample output from the logging merge command.
Switch(config)# logging merge enable
Related Commands
logging server
40.72 logging server
To enable the logging to the remote logging servers, use the logging server command in global
configuration mode.