11 tar table – CANOGA PERKINS 9175 Command Reference User Manual
Page 661
Advertising
CanogaOS Command Reference
39-8
Command Mode
Privileged EXEC
Usage
The source-directory must be a directory.
Examples
The following example creates a tar file named tar1:
Switch# tar create tar1 dir1
Related Commands
tar table
tar xtract
39.11 tar table
To display files in the tar file, use the tar table command in Privileged EXEC mode.
Command Syntax
tar create tar-file-name
tar-file-name
The file name of the tar file.
Command Mode
Privileged EXEC
Usage
The tar-file-name must be a in the flash:.
Examples
The following example shows files in a tar file named tar1:
Switch# tar table tar1
./
./123
./456
Related Commands
tar create
tar xtract
Advertising