3 mpls ftn-entry – CANOGA PERKINS 9175 Command Reference User Manual
Page 460
CanogaOS Command Reference
26-2
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls ilm-entry command is used to remove
one static ILM entry:
Switch# configure terminal
Switch(config)#
no mpls ilm-entry 100
Related Commands
mpls ilm-entry
26.3 mpls ftn-entry
Use this command to configure one static FTN entry.
Command Syntax
mpls ftn-entry {A.B.C.D M.M.M.M | A.B.C.D/M} OUTLABEL A.B.C.D
Syntax Description
A.B.C.D
M.M.M.M
FEC for FTN entry.
A.B.C.D/M
FEC for FTN entry.
OUTLABEL
Outgoing label, the range should be from 16 to
1048575, or 3(implicit null) or 0(explicit null).
A.B.C.D
Nexthop ip address.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls ftn-entry command is used to configure one static FTN
entry:
Switch# configure terminal
Switch(config)#
mpls ftn-entry 200.200.200.0/24 200 12.12.12.2
Related Commands