CANOGA PERKINS 9175 Command Reference - Manual (Page 731)

CanogaOS Command Reference
40-60
=================================================================
1 Test_A 1 *
Switch(config)# re-username Test_A newname Test_B
Switch(config)# do show usernames
Number User name Privilege Password Rsa Key
=================================================================
1 Test_B 1 *
Related Commands
show usernames
40.82 username
To establish a username-based authentication system, use the username command in global
configuration mode. To remove a user in local database, use the no form of this command.
Command Syntax
username name assign rsa key keyname
username name password password
username name secret password
username name privilege level
no username name [assign rsa key]
name The username.
keyname The RSA key name.
password The password for the user.
level The privilege level of the user. The range is 0 to 15.
Command Mode
Global configuration
Default
No username-based authentication system is established.
Usage
The username command provides username or password authentication, or both, for login purposes
only.
Multiple username commands can be used to specify options for a single user.
Examples
The following is sample output from the username command.
Switch(config)# username Test_A privilege 10
Switch(config)# username Test_A password abc
Switch(config)# do show usernames
Number User name Privilege Password Rsa Key