CANOGA PERKINS 9175 Command Reference - Manual (Page 432)

CanogaOS Command Reference
25-20
25.22 keepalive-timeout
Use this command to set the global value for the time-out after which sessions
are rejected. Use the no parameter to revert to default keep-alive time-out.
Command Syntax
(no) keepalive-timeout number
Syntax Description
number Specifies the time-out value in seconds, the
range is 30 to 65535
Command Mode
Router mode
Defaults
The default is 30 seconds.
Examples
In the following example, the keepalive-timeout command is used to set the
global value for the time-out after which sessions are rejected:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# keepalive-timeout 635
Related Commands
configure terminal
show startup-config
25.23 ldp hello-interval
Use this command to set the interval for sending multicast Hello packets via an
interface. Use the no parameter with this command to revert to the
hello-interval value set for the main LDP process.
Command Syntax