8 ip pim ignore-rp-set-priority, 9 ip pim jp-timer – CANOGA PERKINS 9175 Command Reference User Manual
Page 400
CanogaOS Command Reference
24-5
None
Examples
This example shows how to set the pim hello message interval to 100s.
Switch(config-if)#ip pim hello-interval 100
This example shows how to return the pim hello message interval to default value.
Switch(config-if)#no ip pim hello-interval
Related Commands
None
24.8 ip pim ignore-rp-set-priority
Use this command to ignore RP set priority value.
To not ignore the priority, use the no form of this command.
Command Syntax
ip pim ignore-rp-set-priority
no ip pim ignore-rp-set-priority
Command Mode
Global configuration
Defaults
Not ignore
Usage
None
Examples
This example shows how to ignore RP set priority value.
Switch(config)#ip pim ignore-rp-set-priority
This example shows how to return the configurations to default value.
Switch(config)#no ip pim ignore-rp-set-priority
Related Commands
None
24.9 ip pim jp-timer
Use this command to set the join/prune timer value.
To return the timer to default value, use the no form of this command.
Command Syntax