10 label-switching – CANOGA PERKINS 9175 Command Reference User Manual
Page 466
Advertising
CanogaOS Command Reference
26-8
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
Label switch function is disabled.
Examples
In the following example, the mpls disable-all-interfaces command is used to
disable all the L3 interfaces’ label switch function:
Switch# configure terminal
Switch(config)#
mpls disable-all-interfaces
Related Commands
mpls enable-all-interfaces
26.10 label-switching
Use this command to enable an interface’s label switch function.
Command Syntax
(no) label-switching
Syntax Description
Advertising