51 show class-map, 52 show qos aggregator-policer – CANOGA PERKINS 9175 Command Reference User Manual
Page 572
Advertising
CanogaOS Command Reference
31-33
Privileged EXEC
Usage
This command is used to show running-config class-map information.
Examples
Switch# show running-config class-map
class-map we
!
Switch#
Related Commands
None
31.51 show class-map
Use this command to show class-map information
Command Syntax
show class-map (NAME|)
NAME: Specify a class name, if not specify, all class-map will be shown
Command Mode
Privileged EXEC
Usage
This command is used to show class-map information.
Examples
Switch# show class-map
CLASS-MAP-NAME: cm1
match access-group: acl
CLASS-MAP-NAME: cm2
Switch#
Related Commands
None
31.52 show qos aggregator-policer
Use this command to show aggregator-policer information.
Command Syntax
Advertising