CANOGA PERKINS 9175 Command Reference - Manual (Page 423)

CanogaOS Command Reference
25-11
This command has no default settings.
Examples
In the following example, the debug ldp hexdump command is used to write
hexdump specific information to the output:
Switch# debug ldp hexdump
Related Commands
debug ldp fsm
debug ldp packet
25.12 ebug ldp packet
Use this command to monitor all sent or received packets to or from LDP
peers.
Note:
On using a debug command, the router continues to generate an
output until the no parameter is used with the command. The
debug output and system error messages are written on the
virtual terminal. Use the log file or log syslog command in
configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp packet
Syntax Descriptions:
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp packet command is used to received
packets to or from LDP peers:
Switch# debug ldp packet
2002/06/18 11:43:23 LDP: ldp_message_hello_send: Dump of outgoing packet
2002/06/18 11:43:23 LDP: