17 show mpls lsp-tunneling – CANOGA PERKINS 9175 Command Reference User Manual
Page 472
Advertising
CanogaOS Command Reference
26-14
Comm
a
nd Syntax
show mpls interface [IFNAME]
Syntax description
IFNAME
The name of the interface, the format follows
below: eth-0-1, agg1, vlan1, etc.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls interface command is used to
display interfaces bound to MPLS interface:
Switch#
show mpls interface eth-0-9
Interface eth-0-9
Label switching is enabled with label-space 0
minimum label value configured is 16
maximum label value configured is 16384
In-labels used:0, Out-labels used:0
Related Commands
26.17 show mpls lsp-tunneling
Use this command to display MPLS LSP-Tunneling.
Comm
a
nd Syntax
show mpls lsp-tunneling
Syntax description
Advertising