25 show snmp-server view – CANOGA PERKINS 9175 Command Reference User Manual
Page 772
Advertising
CanogaOS Command Reference
44-17
44.25 show snmp-server view
To display the family name, storage type, and status of a Simple Network Management Protocol (SNMP)
configuration and associated MIB, use the show snmp-server view command in privileged EXEC
mode.
Command Syntax
show snmp-server view
Command Mode
Privileged EXEC
Usage
Use this command to display the SNMP view configuration.
Examples
The following is sample output from the show snmp-server view command:
Switch# show snmp-server view
View-name View-type Subtree
===========================================================
abc excluded .1.3.6.2
_all_ included .0
_all_ included .1
_all_ included .2
_none_ excluded .0
_none_ excluded .1
_none_ excluded .2
Related Commands
Advertising